Liquid packaging machinery and equipment: automatic packing machine is suitable for pharmaceutical, food, cosmetic, agricultural chemicals, plastic products and special products such as liquid, paste, paste body, fully automatic packaging, solid material, such as: liquid soap, detergent, shampoo, shower gel, face cream, oil, grease, cosmetics, pesticide, chemical fertilizer, foliar fertilizer, seasoning oil, chili sauce, tomato sauce, etc.
Liquid packaging machine use note automatic packaging machine has the characteristic of packaging speed, but also often appear some quality problems, material property is the first and the important factors affecting the quality of packaging, the proportion of powder or liquid materials, density distribution, loose and liquidity to master is bad, will directly affect the accuracy of the partial shipments, due to the load difference, therefore, Material nature is a problem to be solved in production. In packaging, there will also be packaging quality problems due to mechanical and electronic problems. For example, packaging materials are mixed into the heat sealing part due to the disharmony between bagging time and heat sealing time. Due to poor heat regulation, uneven pressure of push spring causes bad sealing, etc.
The following are the precautions that should be paid attention to during the use of the device:
1) In operation, attention should be paid to whether the sound of the machine is coordinated, and the abnormal operation sound before the accident should be quickly identified.
2) After the film is loaded, if it is not started for a long time, the heat of the longitudinal sealing roller is continuously transmitted to the film, and the film can be burned out. At this time, the three back nuts should be rotated clockwise to separate the two rollers from each other.
3) Often use copper brush to clean the surface of vertical and horizontal sealing roller. If the surface of the heating roller sticks to the material, it will cause poor heat sealing, and thus cause the tension of the longitudinal sealing roller to weaken.
4) Cut off the power supply first when checking, cleaning and repairing.
